1
11
nibbs

@lemmy.zip

nibbs 3 points 18 hours ago

I was too late for that, unfortunately and got . which also some people don't comprehend.
Although it's the capitol and there are sites from public services which use that TLD as well.

What genuinely pisses me off: Prior to that I got .name, and there are sites, which refuse to accept it as a valid TLD when I try to register with them.

Edit: I got <lastname[_with umlauts_]>., tho as this was available, but those don't work that well. Or didn't, when I last checked.

path: 0 25363500 25368629 25370622 25374877, hotness: undefined, score: 3, children: 0
nibbs 2 points 20 hours ago

Thanks for the suggestion, I will take a look at Anubis.

There are no SSH ports open to external, as everything I run is locally in my LAN, I do not have use for externals SSH access and don't want to open that vector.

The services that I (want to) offer to the family, are the common selfhosters finest:

  • immich
  • Stirling PDF
  • Jellyfin

As I do not have a authentication provider yet, the services which require an authentication by user/password are prone to brute force attacks, I want to mitigate that first and foremost.
In the mid to long run, I plan to also deploy an authentication provider for those services like Authelia, TinyAuth, PocketID, Authentik or .
As there are so many of them and the opinion of which is best differ wildly, I have not yet decided and am in kind of a analysis paralysis. :)

path: 0 25369520 25373930, hotness: undefined, score: 2, children: 1
nibbs 1 point 20 hours ago

Thank you for bringing that up, I was wondering that too. As in: "This one has something to hide. Let's poke harder."

Did you try CrowdSec as someone else suggested? Could that be a mitigation as those IPs could be filtered out in the long run, if I understand the concept of CS correct?

path: 0 25367466 25373778, hotness: undefined, score: 1, children: 1
nibbs 2 points 2 days ago

Thank you for suggesting the region block on Unifi, that's a good tip.

I have that previously set in place globally under settings -> security -> protection -> region blocking.
So on a less sophisticated level and not as granular as you.
Yours seems to be much better and I will take a look at it later. At the moment I have way too many ideas and projects boiling, to add yet another one... ;)

path: 0 25355434 25358647, hotness: undefined, score: 2, children: 0
nibbs 1 point 2 days ago

Thanks for bringing it up.

Before I dove into that project, I was checking logs on npm and the service I am already exposing. It seems to me, both only get http GET requests which on npm all get a 404 response.
I don't remember what the service does with those, but I will investigate later. As I didn't panicked, I guess it wasn't that bad.

There are basically no brute force attacks on the service yet and the admin account is only allowed to login from internal IPs.

One initial aspect to further harden the exposed systems were the logs in the UDM which show frequent blocked attempts of varying severity.
This may be security theater and I am not able to assess whether the UDM is a "good enough" protection of the most common attacks.

As I see it, at the moment the UDM already blocks most of the (more sophisticated) attacks and leaves only common requests for the services to handle.

Long story short, as I see it, the UDM has the role of ingress server in my setup.

path: 0 25353325 25354305, hotness: undefined, score: 1, children: 0
nibbs 1 point 2 days ago

Thank you very much for your input. I will look into the third option.
Thought of it, but did forget it over tinkering the last few days. :)

path: 0 25348225 25348266, hotness: undefined, score: 1, children: 1
nibbs 3 points 6 days ago

Angefangen habe ich mit no-ip oder so, dann duckduckdns, jetzt bei dynv6.com. Sind alle kostenlos. Der große Vorteil bei dyn6 ist, dass man nur dass Präfix (2003:1:2:3::) per Script übergeben und für Subdomains nur den Interface Identifier (::4:5:6:7) angeben muss. Daraus wird dann die ganze ipv6 gebaut (2003:1:2:3:4:5:6:7) womit sich Dienste gezielt ansprechen lassen. IPv4 geht natürlich auch.

Die Wechsel habe seinerzeit durchgeführt, weil ich immer wieder Probleme hatte, interne Dienste zu erreichen. Ursache war natürlich eigene Dummheit (Portweiterleitungen falsch).

path: 0 25283529, hotness: undefined, score: 3, children: 0
nibbs 3 points 9 days ago

As you say, "at the time, a reasonable decision". What I don't understand tho, is, why nobody, for five seconds, maybe thought, how it could be a good idea to just filter this standard address at the SMTP server to be redirected to something sensible inside the org. My best guess is, different departments / sub orgs.

path: 0 25220523 25220736 25224015, hotness: undefined, score: 3, children: 1
nibbs 2 points 12 days ago

I enjoy apalrd very much, down to earth, deep dive, no bullshit explanatory videos mostly about networking.

path: 0 25180043, hotness: undefined, score: 2, children: 0
nibbs 2 points 18 days ago

I don't know about torrent downloads, but for "obviously illegal" streaming and IPTV offerings, customers also will get bonked. For example [German]: https://www.bms-rechtsanwaelte.de/...

path: 0 25079416 25084527 25086134 25086447, hotness: undefined, score: 2, children: 0
nibbs 1 point 19 days ago

Hi, could you tell me why? I mean, I think I understand the basics of the risk of brute force attacks. My mitigation for the admin account is, not to allow login outside the local network. Users are allowed from anywhere, as my family uses the library. Also my service (there are others) are routed through NGINX.

Do you have tips for external users using, for example, a VPN only for specific addresses / IPs? At least that was an idea I had, but didn't got got around to dig for solutions.

Thanks in advance.

path: 0 25042015 25042474 25048000 25048200 25049724 25068595, hotness: undefined, score: 1, children: 1

thanks for using Leebra!

go to feed...