Like many others, I have mixed feelings on this. If anyone is stopping by and doesn't want to read through the linked forum thread, this is frameworks goal:

This isn’t a program to get people to go to conferences and rep Framework, it’s a program to give people who are already going to conferences and showing off their Framework some swag and opportunities to talk with the team. It’s not assigning work, it’s just saying thank you to people who are excited about Framework and active in the Linux community.

Did you expose your router login page to the open internet? How'd they get access? Why are you chmoding anything to be 777?

So I think there were a few issues.

• the original pinephone was basically too slow to be usable
• there were a few hardware quirks that had to be fixed in software but made mainlining drivers for it difficult
• the lack of community updates (and you could argue overall community management) caused some developers to move away while also impeded pine64s ability to attract new developers
• the lack of any sort of funding for developers made it difficult for people to work on as any more than a hobby (not necessarily pine64's fault, but it's the reality)
• poor battery life (better idle and sleep support would have been software issues but the hardware was designed to be cheap instead of really useful)
• daily driving Linux on a phone is a poor experience - not pine64s fault but there's a bunch of support missing in Linux that needs to be developed before early adopters can really use Linux phones. Modem power management, audio switching between Bluetooth and speaker, MMS support, camera support, etc.

Well prepared to be failed again https://www.digitaltrends.com/...

The "real" way needs the corresponding Wayland protocol in order to work. The protocol is under development/review, but involves a lot more moving parts that requires coordination and approval from multiple people. This "fake" way was able to be implemented faster and by fewer people as a stop-gap measure

It's disappointing to see so many commentors arguing against you wanting to do this. Windows has it through bitlocker which is secured via the TPM as you know. Yes it can be bypassed, but it's all about your threat level and effort into mitigating it.

I am currently using a TPM on my opensuse tumbleweed machine to auto unencrypt my drive during boot. What you want to do is possible, but not widely supported (yet). Unfortunately, the best I can do is point you to the section in the opensuse wiki that worked for me.

https://en.opensuse.org/...

If you scroll down on that page you'll see the section about TPM support. I don't know how well it will play with your OS. As always, back up all your files before messing with hard drive encryption. Best of luck!

The command was rm -rf $pathvariable

Bug in the code caused the path to be root. Wasn't explicitly malicious

With temps that high in Linux and Windows, it almost sounds like the AIO water block is falling off the CPU.

Plasma 6 is built using QT 6, currently plasma 5 is using QT5. This is a huge effort to move the code to the new version of QT but it brings many improvements behind the scenes. Once this is done a lot of the code is going to be cleaner and more maintainable, which should translate to a smoother user experience.

Here's the plasma 6 wiki: https://community.kde.org/Plasma/Plasma_6#Work_that's_been_decided_on_but_not_implemented_yet

Theres no such thing as "real stainless". Stainless steel 304 is corrosion resistant, it's the cheapest and most common. 316 is better at corrosion resistance and is "marine grade" since it will hold up better to salt water. 316L is some of the best at resisting corrosion, it's more expensive than 304 and is used in lab and surgical equipment. There are a lot of other types, like 309 for higher heat applications, etc.

Cybertruck is probably made from 304.

Definately not supprised that cybertrucks are having this issue. Especially with road salt in the winter. I'm sure the engineers at Tesla saw this coming too.

Man that's a hard sell when the starlite is going for $627 https://us.starlabs.systems/pages/starlite

$70 cheaper with better specs is a no brainer

The Dev stated he's been working on it for 10 years and says its time to move on

I think moving beyond C++ is critical for the long term success of KDE, glad to see it's a new goal

For context:

Snaps are a way to build applications so that they can run on any platform with one build method. It makes it easier for developers to publish their apps across multiple different Linux distro without having to worry about dependency issues.

Snaps have been very poorly received by the community, one of the largest complaints is that a snap program with take 5-10 seconds to start, where as the same program without snap will start instantly.

Ubuntu devs have been working for years to optimize them, but it's a complex problem and while they've made some improvements, it's slow going. While this has been going on, Ubuntu is slowly doubling down more and more on snaps, such as replacing default apps with their snap counterparts.

On the other hand, other methods like flatpak exist, and are generally more liked by the community.

This has led to a lot of Ubuntu users feeling unheard as their feedback is ignored.

As Altima said, it's a 22ohm SMD resistor. You'll need to measure it to get the package size.

Unfortunately resistors don't really just burn out. If the resistor did cause damage from overheating, it's because something drew too much current. My guess is there's a short somewhere else, but there's almost certainly more damage than that resistor.

Good luck!

Great game, always upvote fire emblem

I've worked with 3D printers for the last 8 years. The bambus are the most reliable, easiest to use, fastest, and have some of the best print quality I've seen.

I wish they were more open but their replacement parts are cheap and the value of everything just working is terrific.

Its not as energy dense, overall battery life will be worse. The battery won't degrade as fast overtime, so the battery will keep more total capacity over the years, as compared to a lithium ion battery that would have noticeably less battery after a few years of use.

You're comparing a microcontroller to a purpose built device. Its apples and oranges.

There are add ons to the flipper that incoporate an esp running maurader firmware for wifi tools

I'll start this by saying I'm not familiar with either model, but as a general rule, always go x86 when you can. The Intel processor is going to be much better supported. You might get the snapdragon version to run, but it likely isn't supported by mainline Linux.

That being said, touch screen support on Linux is improving rapidly, but still isn't quite there. Make sure you're aware of the user experience before buying so you won't be disappointed.

Also, my unsolicited 2 cents, I would try to avoid buying lenovo. I've had the unfortunate responsibility of fixing a few of their products (an all-in-one and a few laptops, including a new thinkpad) and can confidently say their reliability, and repairability have greatly diminished. They use cheap parts and are in general, poorly designed.