QRZ?

It's not too complicated. You use a wire mesh to sieve the seeds to separate the ones you want from the ones you don't. Beans are big, but grass seeds are small. I need to do a lot, so I made a big thing for it. I made it spin so I can do more in one batch. The small stuff drops out and a fan below the main part blows away the chaff by using the "wind" which is called "winnowing".

Imagine setting your iptables to only accept a certain ip4 range to exclude countries which tend to probe servers. Then you blow away small port access requests you don't want which you have tunnelled to larger numbers e.g. reject 22 and accept 6622.

It also turned out very pretty!

My arm moves that way. The wood is cut. We are both happy with this arrangement.

The other comment is correct, this is not spatchcocked. This is oven rotated a la Jacques Pepin. The recipe:

Dry rub is 1:1 of salt, pepper, Spanish paprika, and garlic powder. Tie up to prevent movement. Cook on hot pan in oven at 425F. First on one thigh for 25 minutes, rotate to the next thigh for 25, then place on its back for 25+ minutes until the breast reaches 165F. Deglaze pan for a sauce and serve.

Small world. I've built and deployed those before. It's fun to see these writeups in the wild.

I don't know why it does this, but I have similar troubles. I use

kdeconnect-cli --refresh

instead of rebooting though.

Most of the pods were removed.

I bought a half ton from my partner's family. Their plot is like 40 acres, but everybody around grows them too. These are the sweepings from the bottom of the grain silo after they ship the bulk to asia. Hence, they are a bit dirtier and need winnowed again.

I make and sell soy sauce, miso, tofu, and vegan meats among other things.

What type of imagery are you looking for? I typically use NASA or ESA unless I need something very specific, and those tend to be closed-source.

Thanks. Most of the time was making a decent pillow block when I didn't have the right metric drill for my bearings.

I run a Slimbook as an American. I chose it because it was hard to find a powerhouse laptop with ANSI keyboard layouts. The keyboard was the only reason I did not go with Tuxedo. It's fine. Not good, not great. I think my previous System76 had better integration with the hardware. However, I like the aluminum shell on the Slimbook more for daily abuse.

I did not have to pay exorbitant taxes to import. But your mileage may vary.

Yes, and I would love to have one. This cost me only parts from the shed.

The rocks are pretty easy to remove during the soaking step.

This took me a long time to get. Not because I haven't joked about it looking like a bingo tumbler but because B27 is not a valid bingo number.

I got a Titan with expanded drives. I increased the RAM size myself which was inexpensive at the time. I wanted a laptop capable of large CAD projects and other nonsense that I have to do for work.

The PSU brick is a 19.5 V supplying 230 W. I have a dock which supplies power over USB-C, but that seems to act only as life support. The computer needs a lot of juice. However, it it pales in comparison to my desktop computer requiring a 1kW psu to boot. Your frame of reference may be different from mine.

Hardware integration is fine, but not perfect. I have had trouble with their built-in core priority scheme which seemed to struggle with eco mode. I tend to leave it docked at one of my workspaces though, so I leave it on high CPU mode.

With my docks, I run 2 screens in Ultra HD quite easily in addition to the laptop maxing at 2560x1440. This includes when I do something stupid like compile code with a CAD drawing on another screen while watching shows in a browser with a million tabs open.

I run into weird challenges with the hardware that might be only specific to me. E.g., I hate black metal laptops because I do a lot of field work. Summer means burnt wrists. But, this comes with the territory of a laptop targeted for gamers. This may be relevant depending on how far in the outback you are with that solar panel!

The speakers suck, but that's more of a laptop problem than a this-laptop problem.

The company was responsive when I had questions. I had an SSD die (not their fault), and they supported well to help me buy a replacement from a US vendor to reduce cost of shipping it back to Spain.

The Ryzen 9 5900 laptop had just been released by them when I bought it. The timing was right for me. I don't know your needs, so I can't help with that. Of course, looking for Linux-first hardware you will be limited by the slower lifecycle and availability due to demand.

This was not the "perfect" laptop for me when I bought it, but it was the one that ticked enough boxes to be "good enough" in my budget. I am still happy with my choice.

I smell bullshit with the AI thing, but that is just branding I suspect. The specs look similar enough and match my use case. What I call a CAD box or CUDA box somebody will use for AI.

I know you are avoiding US manufacturers, and I'm not here to convert you on that. However, I recommend looking at the System76 computers, since they still seem to be what many upstart Linux-first shops chase. It will give you an idea of what you should look for as good options elsewhere.

Passing through as a person living where this is common and seeing the only other word I know to be "exotische" gave me a chuckle. I love being from the exotic land of South-Central US.

I pick elderberry and add the juice to some of my crabapple wine for a more complex taste.

It is native to places like Mexico and Texas. Most of ours comes from Mexico (as does much of our produce).

Ah. My magic command is ctrl+r "kd" and it pops up from last time.

Oh yeah, you aren't going to fill that niche unless you move into something outside the Linux-first group. Even my System76 Lemur draws 65W.

I'd love to hear if you find something else out there. Sometimes I need to order field gear for very remote jobs, and more recommendations are always welcome. I hate only using those ginormous toughbooks.

I don't think that is a good place for it. Doesn't alias stuff in the bashrc only run at terminal start? The KDE connect issue is during suspend. I've heard of it going in cron, and I know there is a thread out there about doing it on wake.

https://discuss.kde.org/...

There are a few threads like this. I won't link them all.