From the top of my head: the context size is way higher. 128k tokens vs 8k usually.

You're not alone in that. I remember when Blender 2.80 was about to release and it was a big milestone and everybody online was hyping about "Blender 2.8". I think even Blender themselves went with the flow and changed the marketing.

I think the issue is how the games are programmed. Some games check which controllers are plugged in only at start and some do regular checks during runtime.

Good idea. I would have expected new filament to be dry. If nobody else comes along and says: It's definitely 'this', we'll try to dry it. Thanks.

• Es gibt Apps für Gesprächsthemenvorschläge. Die könntest du vorher mal durchschauen und während der Feier in einem geeigneten Moment nochmal ansehen.
• Du kannst den älteren Kollegen auch den Vortritt lassen und einfach versuchen mitzureden.
• Vielleicht noch arbeitsnahe Themen, die haben ne höhere Wahrscheinlichkeit interessant zu sein (manche Leute wollen aber abseits der Arbeit nichts in die Richtung hören)

Das fällt mir spontan ein, ist auch nicht meine Stärke.

Other commenters also suggested to experiment with temperature. We'll also do some speed tests. Thanks.

The layer doesn't look unusual compared to the previous layers, but thanks for the suggestion.

I'm using manufacturer (model designer and filament manufacturer) provided files. If I remember correctly, I tried a lower speed, but I will experiment more with the speed since it was suggested so often. I think, it should be a constant speed, since it's all external perimeter and looks to be set to a constant value.

It's LW-PLA, that foams, could be necessary for the foaming. We just used the filament by the manufacturer with their model files and presets.

Do you mean the exact same model but another filament like regular PLA? Other models with regular PLA is no problem.

The feed should be alright. The spool is mounted above the printer, and its movement should not be restricted and the filament comes vertically down like this.

I'll experiment with temperature and speed, like you and others recommended.

Looking into the 3mf file, the layer height is constant at 0.3 mm.

Thanks.

Last time I tried, I think, I did multiple attempts back-to-back and starting again at layer 1 was no problem, so I don't think it was clogged. I'll experiment more with temperature and speed like you and others suggested.

Yes, we have an enclosure, but that wasn't a problem so far. I'll add it to the things to try. Thank you. :)

First layer 240 deg Celsius, other layers 245 degrees.

Not yet, another commenter also suggested this. I assumed new filament to be dry. We'll try that, if nobody else has a definitive answer.

It's not vase mode, but the model creator designed it to print layers without retraction. It only does a retraction to start the next layer.

I assume, a clog would be obvious to notice? I don't think it was clogged. I did multiple attempts back to back and it started the next attempt without problem at layer 1. As someone, who is rather an amateur, I don't see anything special about this layer.

Oh, that makes sense. I'll try with lower temperatures.

Oh, first hand experience with this model, nice. In that case, I'll put drying the filament and printing with open enclosure, which someone else suggested, to the top of the list. Thank you.